.jpg?width=352&height=235&aspect_ratio=3:2)
Contact your sales representative and clerk
Product datasheets and safety data sheets
Overview of product stock availability
Educational materials
News about industrial seals
Information on new products and services
Exclusive hints and tips
Self-adhesive flange tape made of expanded unidirectional PTFE with higher specific gravity.
Universal flange tape with self-adhesive layer of expanded, unidirectionally oriented PTFE.
Self-adhesive tape made of expanded PTFE with higher specific gravity and stabilizing fillers.
Self-adhesive flange tape made of multidirectionally oriented expanded PTFE.
Self-adhesive flange tape made of expanded PTFE with higher specific gravity. Allows sealing of uneven and damaged flanges at lower tightening torque. Use where residual seal thickness is required. Compared to POWERflon UNI, the smaller width of the tape seals at higher pressure with lower Mu.
Used on flanges, heat exchangers, chemical container lids, partition planes, manholes.
| Size | Value |
|---|---|
| Minimum operating temperature: | -240 °C |
| Maximum operating temperature: | +270 °C +310 °C for short periods |
| Maximum operating pressure: | vacuum up to 200 bar |
| Compressibility: | 70 % |
| Reverse suspension: | 10 % |
| pH: | 0 - 14 |
| Specific weight: | 1.0 +/- 0.1 g/cm³ |
| Vlastnost | Hodnota | Jednotka |
|---|---|---|
|
Operating temperature
|
-240 to 270 | °C |
|
Operating pressure
null
|
0 to 200 | bar |
|
Compressibility
|
70 | % |
|
Reverse suspension
|
10 | % |
|
pH resistance
|
0 to 14 | - |
|
Specific gravity
|
1 | g/cm³ |
|
Non-standard temperature
Krátkodobě
|
271 to 310 | °C |
| Nominal flange ø (mm) | Recommended tape size (mm) |
|---|---|
| 3 to 15 | 3 x 0.7 to 4 x 1.5 |
| 15 to 20 | 4 x 2.5 |
| 20 to 30 | 6 x 4.6 |
| 30 to 40 | 8 x 5.5 |
| more than 40 | 10 x 7 to 14 x 5 |
We can create the perfect seal for your needs, including non-standard sizes.
Based on the analysis of our engineer, we will suggest the most suitable solution and supply all necessary material. The installation of the joint will then be carried out by our expert Torque Service
Designing optimal seals for your operation We will be happy to analyse the sealing solution for your equipment and recommend possible optimisation. We perform the analysis for all types of seals. Fla
Pokorny Industries Partnership in quality
© Pokorny industries s.r.o. 2024 - all rights reserved
Made by servisdesign
