HOME    POWER®gasket  |  POWER®graf  |  POWER®flon  |  POWER®pack  |  POWER®seal  |  POWER®therm  |  Mechanical seals  |  Hylomar  |  ROTORK
POWER®flon HD

Expanded PTFE joint-sealant-tape of higher density for special applications.

well suited to compensate for out-of-parallel and/or damaged sealing surfaces, and where a certain remaining thickness is required.

Application:
Heat exchangers, large containers, tank lids, pump housings, flanges, hand- and manholes, etc.

Density:
 1,0 g/cm3
Operating temperature: -240 °C up to 270 °C
Operating pressure: vacuum up to 200 bar
pH:
 0-14

26,5 MPa*

2*
* DIN 28090
sealing surface width [mm]
suggested tape dimension [mm]
3 up to 15
3 x 0,7 up to 4 x 1,5
15 up to 20
4 x 2,5
20 up to 30
6 x 4,6
30 up to 40
8 x 5,5
more than 40
10 x 7 up to 14 x 5

 

POWER®flon 10

POWER®flon 20

POWER®flon 30

POWER®flon BG-S

POWER®flon UNI

POWER®flon HD

POWER®flon FR

POWER®flon BG

 

Catalogues and
datasheets (PDF) for
download

Acrobat Reader
   
© 1991-2003 POKORNY, spol. s r.o. All rights reserved. POWER®line, POWER®gasket, POWER®graf, POWER®flon, POWER®seal, POWER®pack and POWER®therm are registered trademarks.