HOME    POWER®gasket  |  POWER®graf  |  POWER®flon  |  POWER®pack  |  POWER®seal  |  POWER®therm  |  Mechanical seals  |  Hylomar  |  ROTORK
POWER®graf 5 PREMIUM
datasheet
GRAFTECH (UCAR) GRAFOIL with corrosion and oxidation inhibitor. Stainless expanded sheet 0,1 mm (700 g/m2) reinforcement; material AISI 316L

Max. permanent operating temp. - oxidising atmosphere:
 +500 °C
Max. permanent operating temp. - steam:
 +650 °C
Max. permanent operating temp. - innert:
 +850 °C
Max. operating pressure:
 up to 150 bar
Compressibility (ASTM F 36 A):
 28 - 32 %
Backspring:
 20 - 24 %
Leachable chlorides:
 < 40 ppm
Leachable fluorides: < 800 ppm
Density:
 1,0 - 1,12 g/cm3
Sheet dimensions: 1000 x 1000 mm
  
Thicknesses: 1,5;  2,0;  3,0 mm
  
For medium and namely high pressures. A very good for big and frequent pressure changes - steam line. The best pressure resistance and recovery (backspring). Suitable for use in chemical and petrochemical industry and energetics.

       

POWER®graf 1

POWER®graf 3

POWER®graf 4

POWER®graf 5

GRAFKOTE®

POWER®graf TAPE

POWER®graf COR

GRAFOIL GTS®

 

Catalogues and
datasheets (PDF) for
download

Acrobat Reader
   
© 1991-2003 POKORNY, spol. s r.o. All rights reserved. POWER®line, POWER®gasket, POWER®graf, POWER®flon, POWER®seal, POWER®pack and POWER®therm are registered trademarks.