HOME    POWER®gasket  |  POWER®graf  |  POWER®flon  |  POWER®pack  |  POWER®seal  |  POWER®therm  |  DEPAC  |  Hylomar  |  ROTORK
 
STUFFING BOX PACKINGS POWER®pack
Material:
Carbon and Graphite
Graphite yarn, carbon yarn, "Preox"
  1010
 
P[bar] 30 100 300
t [°C] -240 up to 450, steam 650
pH 0-14
v[m/s] 30
  density 1,0 g/cm3
   
Yarn: braided from pure, expanded mineral graphite. Very low coefficient of friction and high thermal conductivity; extended shelf life, does not harden.
Application: sealing and maintenance of valves and pumps, prepressed rings.
+
  1010-I
 
P[bar] - - 300
t [°C] -240 up to 450, steam 650
pH 0-14
v[m/s] 30
  density 1,1 g/cm3
   

Yarn: braided packing made from pure, flexible mineral graphite, reinforced with thin inconel wires. Very low coefficient of friction and high thermal conductivity; extended shelf life, does not harden.
Application: suitable only for static applications, valves and tongue/groove flanges.
+
  1020
 
P[bar] 30 200 300
t [°C] -240 up to 450, steam 650
pH 0-14
v[m/s] 20
  density 1,1 g/cm3
   

Yarn: braided from pure expanded flexible graphite, reinforced at the corners with a high-quality pure carbon yarn.
Application: sealing and maintenance of valves and pumps, prepressed rings. Higher pressure resistance.
+
  1110
 
P[bar] 25 100 300
t [°C] -240 up to 450, steam 650
pH 0-14
v[m/s] 20
  density 1,1 g/cm3
   

Yarn: braided from high-quality pure carbon fibre yarn impregnated with graphite and a corrosion inhibitor.
Application: sealing and maintenance of valves and pumps, prepressed rings. Especially suited for closing rings in combination with 1010 style or shaft injectable packing. High thermal conductivity. 1110-I style is reinforced with thin inconel wires.
+
  1210
 
P[bar] 30 100 300
t [°C] -240 up to 450, steam 650
pH 0-14
v[m/s] 20
  density 0,9 g/cm3
   

Yarn: braided from highest quality pure graphite yarn and impregnated with corrosion inhibitor and graphite powder.
Application: sealing and maintenance of valves and pumps, prepressed rings. Especially suited for closing rings in combination with 1010 style or shaft injectable packing. High thermal conductivity. Excelent chemical and mechanical resistance. 1210-I style is reinforced with thin inconel wires.
+
  1410
 
P[bar] 25 - 100
t [°C] +300
pH 3-12
v[m/s] 15
  density 0,9 g/cm3
   

Yarn: diagonally braided from Pan ("Preox") yarn, impregnated throughout with pure graphite powder and a corrosion inhibitor
Application: sealing and maintenance of valves and pumps, prepressed rings. Economicaly advantageous for middle-challenging applications.
1410-I style is reinforced with thin inconel wires.

MATERIAL:

Expanded graphite
yarn, graphite and
carbon yarn,
"Preox"

Graphite - PTFE yarn
- GFO style

PTFE

Novoloid,
textured glass fibre




Prepressed rings
and accessories

Chemical resistance
(PDF)

 

Catalogues and
datasheets (PDF)

Acrobat Reader
 
© 1991-2003 POKORNY, spol. s r.o. All rights reserved. POWER®line, POWER®gasket, POWER®graf, POWER®flon, POWER®seal, POWER®pack and POWER®therm are registered trademarks.