HOME    POWER®gasket  |  POWER®graf  |  POWER®flon  |  POWER®pack  |  POWER®seal  |  POWER®therm  |  Mechanical seals  |  Hylomar  |  ROTORK
 
POWER®therm
Heat resistant cloth
Construction:
Wide range of cloths made of different materials : glass fibre 550 °C or 750 °C, ceramic fibre, carded HT glass fibre, silica and PANXIDE fibre.
Reinforced with stainless steel wires, treated with silicone, ruberized, aluminized, impregnated with vermiculite.

Application:
Protection against heat and insulation, condensate proof pipe covering, fireproof blankes and curtains, compensating joints, protective clothing and garnments, in shipyards, railway. aeronautic, metallurgic and chemical field.

Square braided ropes

Round braided ropes

Twisted cords

Elastic and soft cords

Tapes

Sleevings

Rolled cloth packings

Heat resistant cloths

Temperature
resistance of materials

 

Catalogues and
datasheets (PDF)

Acrobat Reader
 
 

Aluminized glass fibre cloth 550 °C

Plain cloth can be aluminized in order to reduce fraying by cutting and as further protection against heat.

Available in different widths and thicnesses (from 0,18 up to 3 mm).
Glass fibre cloth 550 °C treated with silicone

Glass fibre cloth is treated with red or grey silicone on one or two sides to ensure protection against liquids and welding splashes.
 

Glass fibre cloths 550 °C and 750 °C reinforced with stainless steel and treated

Stainless steel reinforcement both in warp and in welf to ensure the highest tensile strenght.

Cloth can be aluminized in order to reduce fraying by cutting and as further protection against heat or can be also treated with red or grey silicone on one or two sides to ensure protection against liquids and welding splashes.
 
Smokeless glass fibre cloth

Glass fibre cloth are subjected to special treatments so they do not develop smoke when put into use and they guarantee an excellent resistance against heat and, if impregnated with vermiculite, against flame.

They are available in different widths and weights.
Ceramic and carded HT glass fibre cloth

Cloths can be treated and altered by differnt ways:

- alluminized (to reduce fraying by cutting)
- rubberized (with neoprene, natural rubber, EPDM)
- treated by silicone (protection against liquids and welding
  splashes)

We can also offer preoxidized ceramic fibre cloth which guarantees constant resistance against the highest temperatures (up to 1260 °C).

Amorphous silica cloth

Excellent resistance to high temperatures, up to 1200 °C (melting point 1650 °C).

Can be treated by:

- rubber
- silicone
© 1991-2003 POKORNY, spol. s r.o. All rights reserved. POWER®line, POWER®gasket, POWER®graf, POWER®flon, POWER®seal, POWER®pack and POWER®therm are registered trademarks.